Blowing out pool lines is a necessary winterizing task. It helps prevent freezing and cracking during colder months. Water left in the lines expands as it freezes, which can cause serious damage. Proper draining and blowing helps the pipes stay clear until springtime use begins again.
The process involves disconnecting the hoses from the pool filtration system and attaching an air compressor instead. Starting at the farthest point, high-pressure air is inserted to clear any remaining water from the lines. It takes practice to learn the techniques, like moving systematically along the layout.
Many pool owners forget this important step after a summer of enjoyment. But taking the time in fall means the pool will be repaired for swimming again next year. Professional companies offer the service for homeowners who lack the necessary equipment. Whether doing it yourself or hiring help, empty lines mean less stress over freezing when temperatures drop outside.
Key Takeaways
- Pool lines connect the pool equipment and need to be cleared of debris each season to properly filter and sanitize the water.
- Compressed air can be used to blow out leaves and other debris from lines before filling the pool to prevent clogs that could disrupt circulation.
- Wear protective eyewear when using compressed air as debris could spray out forcefully and pose an impact hazard to sensitive areas like eyes.
- Start by detaching hoses from filters and blow backwards from furthest point to cleaner, working methodically section by section.
- Inspect PVC connections thoroughly after blowing as older lines may crack or separate from pressure, requiring the replacement of damaged segments. Don’t miss to read out this topic Soda To Add To Pool Calculator.
Overview Of Blowing Out Pool Lines
Winter pool maintenance requires clearing water from lines to prevent freezing damage. The process involves attaching an air compressor to valves and releasing debris through submerged hoses. Techs skillfully release trapped air while carefully reversing flow to blow water out. Precautions include securely capping openings to contain mess.
Nearby items must be protected from potential spray. Expertly executed line blowing saves the filtration system for next season. Property owners schedule in fall for thorough preparation and protected plumbing infrastructure.
Step By Step Guide To Blowing Out Pool Lines
- Gather a vacuum head attachment, hose, pole, and vacuum release valve. Check o-rings and seals for leaks.
- Slide hose ends into the vacuum head port and pushes to lock in place. Seal should hold tight when tugged.
- Open skimmer baskets, dirt traps, and main drain covers. Remove any leaves or debris before vacuuming to prevent clogs.
Blowing Out Pool Lines With Compressor
As fall arrived and leaves covered the pool, it was time to prepare for winter. Mark readied the compressor and attached the hose to the return line. He turned the machine on and debris began flying out of the pipes.
Leaves, dirt, and algae were quickly expelled from the system. After several minutes the water ran clear, ensuring the pool was clean and protected until spring. With a loud rushing sound, flakes of water erupted from the pipes. Within minutes all the lines were cleared, ready for the cold months ahead.
Blower For Pool Lines
It was getting cooler outside and Mike knew it was time to winterize the pool. He pulled out the blower and attached the hose to the return line inlet. Pushing the button, air started flowing through the pipes with a whooshing sound.
Leaves and debris shot out of the drainage holes as the lines were cleared. Within moments the water was blown out, leaving the lines dry. With the push of a button the job was done, thanks to the trusty blower that prepared the pool for winter.
Blowing Out Pool Lines Through Skimmer
Fall was approaching and Jordan needed to drain the pool. He attached one end of a hose to the air compressor and the other end to the skimmer basket. Pressing start, air rushed through the hose with a loud hiss.
Dirt and murky water sprayed out of the pipes into the empty pool. After a few minutes, only air was emerging from the return jets. With a few pumps of the compressor, all the lines were cleared through the skimmer. The pool was now emptied and prepared for the coming winter storms.
Blowing Out Pool Lines Reddit
On a pool maintenance subreddit, users were sharing tips for winterizing their pools. One commenter described how they blow out the lines. I attach my air compressor to the skimmer and start blasting air through. Within seconds, you see debris shooting out all the returns.
A few more minutes and it’s just air coming out. By the time I’m done, the whole thread is clear. Others thanked them for the advice. Blowing out the lines through the skimmer seemed to be a popular method discussed on Reddit to efficiently prepare pools for winter.
Blowing Out Pool Lines For Winter
Fall was near its end as the nights grew cooler. It was time to winterize the pool. Mike connected the air compressor to the return line inlet. He cranked it and began clearing debris from the system.
Dirt and leaves sprayed out as the lines were flushed thoroughly. Within minutes, only air was flowing through the pipes. Now empty and clean, the lines were fully prepped for the season of inactivity. Another task crossed off before Old Man Winter’s arrival.
Psi For Blowing Out Pool Lines
It was time to winterize the pool so Roger set up his air compressor. He knew the right PSI was crucial for efficiently blowing out the lines. After experimenting last year, he found 60 PSI worked best.
At that pressure, debris shot out of the returns but the plastic pipes weren’t at risk of cracking. With a steady blast of compressed air at the optimal PSI, within moments all the lines were cleared of water. Roger was satisfied knowing the perfect pressure saved him time while prepping for winter.
Best Shop Vac For Blowing Out Pool Lines
When it came to winterizing his pool, Mark wanted the task done right. He researched different shop vacs to use for blowing out the lines. People raved about the Dewalt vac with its 8 gallon capacity and 90 air watts of power.
After putting it to the test, Mark saw why it was rated the best – within minutes the powerful suction had cleared even the most stubborn of leaves from the farthest reaches of his pool plumbing. Now that was a vac truly fit for the job.
FAQ’s
How Do You Get Air Out Of Pool Lines?
She connected a hose to the return jet and placed the other end in the pool water. Within moments the bubbles emerged, revealing clear lines once more.
How Do I Clear The Water Lines In My Pool?
He attached the compressor to the inlet valve and engaged the air blast. Debris shot out the returns until only air flowed – the lines were freshly scrubbed.
How Do You Drain A Pool Line?
Jenna attached a hose to the return fitting and ran it to her backyard, bubbles rising as water drained and grass became soggy.
How Do You Unclog A Pool Drain Line?
Jake inserted a jet hose into the drain port and used water pressure to blast away debris clogging the line. Clean water circled once more.
Conclusion
After years of maintaining his pool, Mark had perfected the process of blowing out the lines before winter. He made sure to use the ideal air pressure and check each line to ensure they were fully clear, Blowing Out Pool Lines.
Once satisfied the system was immaculately prepped, he could rest easy knowing his preparations would protect the pool through the colder months. The time spent sweeping away debris was a small investment to enjoy years of swimming in the seasons to come.
